N: 27 S: 24 E: -35 W: -39
Description
The SPURS (Salinity Processes in the Upper Ocean Regional Study) project is an oceanographic process study and associated field program that aim to elucidate key mechanisms responsible for near-surface salinity variations in the oceans. The project involves two field campaigns and a series of cruises in regions of the Atlantic and Pacific Oceans exhibiting salinity extremes. SPURS employs a suite of state-of-the-art in-situ sampling technologies that, combined with remotely sensed salinity fields from the Aquarius/SAC-D and SMOS satellites, provide a detailed characterization of salinity structure over a continuum of spatio-temporal scales. The SPURS-1 campaign involved a series of 5 cruises during 2012 - 2013 seeking to characterize the salinity structure and balance in a high salinity, high evaporation, and low rainfall region of the subtropical North Atlantic. It aims to resolve processes responsible for maintaining the subtropical surface salinity maximum in this region and within a 900 x 800-mile square study area centered at 25N, 38W. The Tenuse (Slocum) glider is an autonomous undulating profiler measuring salinity and temperature. It was deployed from the Thalassa on 21-August and recovered by the Knorr on 4-October-2012. It made a total of about 1400 profiles during that period (1-2 profiles/hour), going from the surface to 200 m. Resulting trajectory profile data from the Tenuse glider include georeferenced CTD observations on salinity, temperature, pressure, and depth.
Product Summary
Citation
Citation is critically important for dataset documentation and discovery. This dataset is openly shared, without restriction, in accordance with the EOSDIS Data Use and Citation Guidance.
Copy Citation
Documents
Variables
The table below lists the variables contained within a single granule for this dataset. Variables often contain observed or derived geophysical measurements collected from a variety of sources, including remote sensing instruments on satellite and airborne platforms, field campaigns, in situ measurements, and model outputs. The terms variable, parameter, scientific data set, layer, and band have been used across NASA’s Earth science disciplines; however, variable is the designated nomenclature in NASA’s Common Metadata Repository (CMR). Variable metadata attributes such as Name, Description, Units, Data Type, Fill Value, Valid Range, and Scale Factor allow users to efficiently process and analyze the data. The full range of attributes may not be applicable to all variables. Additional information on variable attributes is typically available in the data, user guide, and/or other product documentation.
For questions on a specific variable, please use the Earthdata Forum.
| Name Sort descending | Description | Units | Data Type | Fill Value | Valid Range | Scale Factor | Offset |
|---|---|---|---|---|---|---|---|
| lat | Latitude of CTD measurement | degrees_north | float | N/A | 25 to 27 | 1 | N/A |
| lon | Longitude of CTD measurement | degrees_east | float | N/A | -36 to -35 | 1 | N/A |
| pressure | Pressure of CTD measurement | decibars | float | 1.0E+30 | 0.23844 to 199.67913 | 1 | N/A |
| salinity | Salinity of CTD measurement | psu | float | 1.0E+30 | 36.51598 to 37.73934 | 1 | N/A |
| temperature | Temperature of CTD measurement | degrees_C | float | 1.0E+30 | 17.7848 to 28.7514 | 1 | N/A |
| time | Time of CTD measurement | seconds since 1970-01-01 00:00:00 0:00 | double | N/A | N/A | 1 | N/A |
| z | Depth of CTD measurement | meters | float | N/A | 0.2368873150705 to 198.28833470658 | 1 | N/A |