N: 90 S: -90 E: 180 W: -180
Description
The Visible Infrared Imaging Radiometer Suite (VIIRS) Active Fires (VJ214IMG) Version 2 product is produced in 6-minute temporal satellite increments (swaths) at 375 meter resolution from the VIIRS sensor located on the NOAA-21 satellite. This product is designed after the Terra and Aqua Moderate Resolution Imaging Spectroradiometer (MODIS) Thermal Anomalies and Fire data products to promote the continuity of the Earth Observation System (EOS) mission. This data product can enable users to understand the location and intensity of fire events as well as identifying thermal anomalies.
The VJ214IMG product includes 26 Science Dataset (SDS) variables to analyze key factors in fire detection, including atmospheric conditions (e.g., atmospheric reflectance, solar zenith angle, brightness temperature) and fuel type for the event. The fire mask variable in the VJ214IMG product is the primary variable and can be used to identify fires and other thermal anomalies such as volcanoes. In addition to the fire mask, brightness temperature is provided for VIIRS channels M5, M7, M11, M13, M15, and M16.
Each swath of data is approximately 3,060 kilometers along track (long) and 3,060 kilometers across track (wide). The VJ214IMG product is also used to generate higher-level fire data products.
Use of the VJ203MODLL data product is required to apply accurate geolocation information to the VNP14IMG Science Datasets (SDS).
Known Issues
- For complete information about known issues please refer to the MODIS/VIIRS Land Quality Assessment website.
Version Description
Product Summary
Citation
Citation is critically important for dataset documentation and discovery. This dataset is openly shared, without restriction, in accordance with the EOSDIS Data Use and Citation Guidance.
Copy Citation
File Naming Convention
The file name begins with the Product Short Name (VJ214IMG) followed by the Julian Date of Acquisition formatted as AYYYYDDD (A2026009), the Hours and Minutes of Acquisition provided as HHMM (1642), the Version of the data collection (002), the Julian Date and Time of Production designated as YYYYDDDHHMMSS (2026014154305), and the Data Format (nc).
Documents
USER'S GUIDE
ALGORITHM THEORETICAL BASIS DOCUMENT (ATBD)
PRODUCT QUALITY ASSESSMENT
SCIENCE DATA PRODUCT VALIDATION
Variables
The table below lists the variables contained within a single granule for this dataset. Variables often contain observed or derived geophysical measurements collected from a variety of sources, including remote sensing instruments on satellite and airborne platforms, field campaigns, in situ measurements, and model outputs. The terms variable, parameter, scientific data set, layer, and band have been used across NASA’s Earth science disciplines; however, variable is the designated nomenclature in NASA’s Common Metadata Repository (CMR). Variable metadata attributes such as Name, Description, Units, Data Type, Fill Value, Valid Range, and Scale Factor allow users to efficiently process and analyze the data. The full range of attributes may not be applicable to all variables. Additional information on variable attributes is typically available in the data, user guide, and/or other product documentation.
For questions on a specific variable, please use the Earthdata Forum.
| Name Sort descending | Description | Units | Data Type | Fill Value | Valid Range | Scale Factor | Offset |
|---|---|---|---|---|---|---|---|
| Algorithm QA | Algorithm QA | BitField | uint32 | N/A | N/A | N/A | N/A |
| Fire mask | Confidence of Fire | Class Flag | uint8 | N/A | 0 to 9 | N/A | N/A |
| FP_AdjCloud | Number of adjacent cloud pixels | N/A | uint16 | N/A | 0 to 8 | N/A | N/A |
| FP_AdjWater | Number of adjacent water pixels | N/A | uint16 | N/A | 0 to 8 | N/A | N/A |
| FP_confidence | Detection confidence | N/A | uint8 | N/A | 7 to 9 | N/A | N/A |
| FP_day | Day Flag for Fire Pixel | N/A | uint8 | N/A | 0 to 1 | N/A | N/A |
| FP_latitude | Latitude of Fire Pixel | Degree | float32 | N/A | -90 to 90 | N/A | N/A |
| FP_line | Fire Pixel line | Number | uint16 | N/A | 0 | N/A | N/A |
| FP_longitude | Longitude of Fire Pixel | Degree | float32 | N/A | -180 to 180 | N/A | N/A |
| FP_MAD_DT | Background M13-M15 brightness temperature difference mean absolute deviation | Kelvin | float32 | 0 | 0 to 20 | N/A | N/A |
| FP_MAD_T4 | Background I04 Brightness Temperature Mean Absolute Deviation of Fire Pixel | Kelvin | float32 | 0 | 0 to 20 | N/A | N/A |
| FP_MAD_T5 | Background I05 Brightness Temperature Mean Absolute Deviation of Fire Pixel | Kelvin | float32 | 0 | 0 to 20 | N/A | N/A |
| FP_MeanDT | Mean background brightness temperature difference | Kelvin | float32 | 0 | -10 to 50 | N/A | N/A |
| FP_MeanRad13 | M13 Background Radiance of Background of Fire Pixel | W/m²/sr/μm | float32 | 0 | 0 to 10 | N/A | N/A |
| FP_MeanT4 | I04 Brightness Temperature of Background of Fire Pixe | Kelvin | float32 | 0 | 270 to 340 | N/A | N/A |
| FP_MeanT5 | I05 Brightness Temperature of Background of Fire Pixel | Kelvin | float32 | 0 | 265 to 330 | N/A | N/A |
| FP_power | Fire radiative power | Megawatts | float32 | 0 | 0 to 1500 | N/A | N/A |
| FP_Rad13 | M13 Radiance for Each Fire Pixel | W/m²/sr/μm | float32 | 0 | 0 to 400 | N/A | N/A |
| FP_sample | Fire Pixel Sample | N/A | uint16 | N/A | 0 to 6399 | N/A | N/A |
| FP_SolAzAng | Solar Azimuth Angle of Fire Pixel | Degree | float32 | N/A | -180 to 180 | N/A | N/A |
| FP_SolZenAng | Solar Zenith Angle of Fire Pixel | Degree | float32 | N/A | 0 to 180 | N/A | N/A |
| FP_T4 | I04 Brightness Temperature of Fire Pixel | Kelvin | float32 | N/A | 208 to 367 | N/A | N/A |
| FP_T5 | I05 Brightness Temperature of Fire Pixel | Kelvin | float32 | N/A | 205 to 380 | N/A | N/A |
| FP_ViewAzAng | View Azimuth Angle of Fire Pixel | Degree | float32 | N/A | -180 to 180 | N/A | N/A |
| FP_ViewZenAng | View Zenith Angle of Fire Pixel | Degree | float32 | N/A | 0 to 70 | N/A | N/A |
| FP_WinSize | Background Window Size | N/A | uint16 | 0 | 10 to 35 | N/A | N/A |