N: 90 S: -90 E: 180 W: -179
Description
A Group for High Resolution Sea Surface Temperature (GHRSST) global Level 4 sea surface temperature analysis produced daily on a 0.09-degree grid at Remote Sensing Systems. This product uses optimal interpolation (OI) from microwave (MW) sensors including the Tropical Rainfall Measuring Mission (TRMM) Microwave Imager (TMI), the NASA Advanced Microwave Scanning Radiometer-EOS (AMSR-E), the WindSat on the Coriolis satellite, the Global Precipitation Measurement (GPM) Microwave Imager (GMI), and the Advanced Microwave Scanning Radiometer 2 (AMSR2) onboard the GCOM-W1 satellite, as well as infrared (IR) sensors such as the Moderate Resolution Imaging Spectroradiometer (MODIS) on the NASA Aqua and Terra platforms and the Visible Infrared Imaging Radiometer Suite (VIIRS) on board the Suomi-NPP and NOAA-20 satellites. These MW sensors are used through the SST production based on the sensor data availability. The through-cloud capabilities of microwave radiometers provide a valuable picture of global sea surface temperature (SST) while infrared radiometers (i.e., MODIS) have a higher spatial resolution. This analysis does not use any in situ SST data such as drifting buoy SST. Compared with the previous version 5.0 dataset, version 5.1 is processed using updated input files, VIIRS on NOAA-20 is included, the sensor-specific error statistics (SSES) for each microwave sensor are updated, and deficiencies in the OI processing have been addressed.
Product Summary
Citation
Citation is critically important for dataset documentation and discovery. This dataset is openly shared, without restriction, in accordance with the EOSDIS Data Use and Citation Guidance.
Copy Citation
Documents
DATA CITATION GUIDELINES
GENERAL DOCUMENTATION
Variables
The table below lists the variables contained within a single granule for this dataset. Variables often contain observed or derived geophysical measurements collected from a variety of sources, including remote sensing instruments on satellite and airborne platforms, field campaigns, in situ measurements, and model outputs. The terms variable, parameter, scientific data set, layer, and band have been used across NASA’s Earth science disciplines; however, variable is the designated nomenclature in NASA’s Common Metadata Repository (CMR). Variable metadata attributes such as Name, Description, Units, Data Type, Fill Value, Valid Range, and Scale Factor allow users to efficiently process and analyze the data. The full range of attributes may not be applicable to all variables. Additional information on variable attributes is typically available in the data, user guide, and/or other product documentation.
For questions on a specific variable, please use the Earthdata Forum.
| Name Sort descending | Description | Units | Data Type | Fill Value | Valid Range | Scale Factor |
|---|---|---|---|---|---|---|
| analysed_sst | analysed sea surface temperature | K | short | -32768 | -32767 to 32767 | 0.000839259 |
| analysis_error | estimated error standard deviation of analysed_sst | K | short | -32768 | -32767 to 32767 | 1.5259255E-5 |
| lat | geographical coordinates, WGS84 datum | degrees_north | float | N/A | -90 to 90 | 1 |
| lon | geographical coordinates, WGS84 datum | degrees_east | float | N/A | -180 to 180 | 1 |
| mask | land sea ice lake bit mask | N/A | byte | -128 | 0 to 127 | 1 |
| sea_ice_fraction | sea ice area fraction | N/A | byte | -128 | 0 to 100 | 0.01 |
| time | nominal time of L4 analysis | seconds since 1981-01-01 00:00:00 | int | N/A | N/A | 1 |