N: 90 S: -90 E: 180 W: -180
Description
Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented.
For data after August 6th of 2019, please check S5P_L2__AER_AI data collection.
The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions.
The TROPOMI UV Aerosol Index has been calculated based on wavelength dependent changes in Rayleigh scattering in the UV spectral range where ozone absorption is weak. A residual value is calculated from measured top-of-atmosphere (TOA) reflectance and per-calculated theoretical reflectance for a Rayleigh scattering-only atmosphere given a wavelength pair. TROPOMI UVAI products use the classical wavelength pair of 340/380 nm, and the OMI chosen 354/388 nm pair for the long-term continuous AI record. Figure 1 shows TROPOMI UVAI of orbit# 4060.
Product Summary
Documents
USER'S GUIDE
READ-ME
ALGORITHM THEORETICAL BASIS DOCUMENT (ATBD)
GENERAL DOCUMENTATION
PRODUCT HISTORY
Variables
The table below lists the variables contained within a single granule for this dataset. Variables often contain observed or derived geophysical measurements collected from a variety of sources, including remote sensing instruments on satellite and airborne platforms, field campaigns, in situ measurements, and model outputs. The terms variable, parameter, scientific data set, layer, and band have been used across NASA’s Earth science disciplines; however, variable is the designated nomenclature in NASA’s Common Metadata Repository (CMR). Variable metadata attributes such as Name, Description, Units, Data Type, Fill Value, Valid Range, and Scale Factor allow users to efficiently process and analyze the data. The full range of attributes may not be applicable to all variables. Additional information on variable attributes is typically available in the data, user guide, and/or other product documentation.
For questions on a specific variable, please use the Earthdata Forum.
| Name Sort descending | Description | Units | Data Type | Fill Value | Valid Range | Scale Factor | Offset |
|---|---|---|---|---|---|---|---|
| PRODUCT/SUPPORT_DATA/GEOLOCATIONS/latitude_bounds | PRODUCT/SUPPORT_DATA/GEOLOCATIONS/latitude_bounds from S5P_L2__AER_AI_1 | N/A | N/A | N/A | N/A | N/A | N/A |
| PRODUCT/SUPPORT_DATA/GEOLOCATIONS/longitude_bounds | PRODUCT/SUPPORT_DATA/GEOLOCATIONS/longitude_bounds from S5P_L2__AER_AI_1 | N/A | N/A | N/A | N/A | N/A | N/A |
| PRODUCT/SUPPORT_DATA/GEOLOCATIONS/satellite_altitude | satellite altitude from S5P_L2__AER_AI_1 | m | N/A | N/A | N/A | N/A | N/A |
| PRODUCT/SUPPORT_DATA/GEOLOCATIONS/satellite_latitude | sub satellite latitude from S5P_L2__AER_AI_1 | degrees_north | N/A | N/A | N/A | N/A | N/A |
| PRODUCT/SUPPORT_DATA/GEOLOCATIONS/satellite_longitude | satellite_longitude from S5P_L2__AER_AI_1 | degrees_east | N/A | N/A | N/A | N/A | N/A |
| PRODUCT/SUPPORT_DATA/GEOLOCATIONS/satellite_orbit_phase | fractional satellite orbit phase from S5P_L2__AER_AI_1 | 1 | N/A | N/A | N/A | N/A | N/A |
| PRODUCT/SUPPORT_DATA/GEOLOCATIONS/solar_azimuth_angle | solar azimuth angle from S5P_L2__AER_AI_1 | degree | N/A | N/A | N/A | N/A | N/A |
| PRODUCT/SUPPORT_DATA/GEOLOCATIONS/solar_zenith_angle | solar zenith angle from S5P_L2__AER_AI_1 | degree | N/A | N/A | N/A | N/A | N/A |
| PRODUCT/SUPPORT_DATA/GEOLOCATIONS/viewing_azimuth_angle | viewing azimuth angle from S5P_L2__AER_AI_1 | degree | N/A | N/A | N/A | N/A | N/A |
| PRODUCT/SUPPORT_DATA/GEOLOCATIONS/viewing_zenith_angle | viewing zenith angle from S5P_L2__AER_AI_1 | degree | N/A | N/A | N/A | N/A | N/A |
| PRODUCT/SUPPORT_DATA/INPUT_DATA/instrument_configuration_identifier | IcID from S5P_L2__AER_AI_1 | N/A | N/A | N/A | N/A | N/A | N/A |
| PRODUCT/SUPPORT_DATA/INPUT_DATA/instrument_configuration_version | IcVersion from S5P_L2__AER_AI_1 | N/A | N/A | N/A | N/A | N/A | N/A |
| PRODUCT/SUPPORT_DATA/INPUT_DATA/ozone_total_column | total column amount of ozone from ECMWF model data from S5P_L2__AER_AI_1 | mol m-2 | N/A | N/A | N/A | N/A | N/A |
| PRODUCT/SUPPORT_DATA/INPUT_DATA/scaled_small_pixel_variance | scaled small pixel variance from S5P_L2__AER_AI_1 | 1 | N/A | N/A | N/A | N/A | N/A |
| PRODUCT/SUPPORT_DATA/INPUT_DATA/surface_altitude | Surface altitude from S5P_L2__AER_AI_1 | m | N/A | N/A | N/A | N/A | N/A |
| PRODUCT/SUPPORT_DATA/INPUT_DATA/surface_altitude_precision | surface altitude precision from S5P_L2__AER_AI_1 | m | N/A | N/A | N/A | N/A | N/A |
| PRODUCT/SUPPORT_DATA/INPUT_DATA/surface_classification | Land-water mask and surface classification based on a static database from S5P_L2__AER_AI_1 | N/A | N/A | N/A | N/A | N/A | N/A |
| PRODUCT/SUPPORT_DATA/INPUT_DATA/surface_pressure | surface_air_pressure from S5P_L2__AER_AI_1 | Pa | N/A | N/A | N/A | N/A | N/A |
| PRODUCT/time | reference time for the measurements from S5P_L2__AER_AI_1 | seconds since 2010-01-01 00:00:00 | N/A | N/A | N/A | N/A | N/A |
| PRODUCT/time_utc | Time of observation as ISO 8601 date-time string from S5P_L2__AER_AI_1 | N/A | N/A | N/A | N/A | N/A | N/A |