Skip to main content

Description

This dataset contains the latest reprocessed version 3.1 of the Level 2B science-quality ocean surface wind vector retrievals from the QuikSCAT scatterometer. The retrievals are provided on a non-uniform grid within the swath at 12.5 km pixel resolution. Higher resolution is achieved through a slice composite technique in which high resolution slice measurements from L1B data are composited into a 12.5 km wind vector cell. Version 3.1 processing begins with the same L1B (time-ordered backscatter) data as used in the previous Version 3.0 processing. Version 3.1 improves upon the previous Version 3.0 processing by incorporating enhanced coastal processing using a Land Contamination Ratio (LCR) method with a fixed threshold. The 12.5 km binning resolution combined with the LCR processing enables this dataset to provide wind vector retrievals with approximately half the coastal gap as compared to the Version 3.0 12.5 km L2B dataset. The geophysical model function used to produce the wind vector cell retrievals remains unchanged between Version 3.0 and 3.1. Each L2B file corresponds to a specific orbital revolution (rev) number, which begins at the southernmost point of the ascending orbit. This is the official dataset produced by the NASA QuikSCAT Project through the SeaWinds Processing and Analysis Center (SeaPAC). More details to the processing changes and improvements are to be published in the near future, but for now can be referenced by the following presentation: https://mdc.coaps.fsu.edu/scatterometry/meeting/docs/2016/Thu_AM/coastal-poster.pdf .

Product Summary

Platforms
QUIKSCAT
Instruments
SEAWINDS
Spatial Extent

N: 90 S: -90 E: 180 W: -180

Spatial Resolution
12500 Meters x 12500 Meters
Location
GLOBAL OCEAN
Coordinate System
CARTESIAN
Granule Spatial Representation
CARTESIAN
Temporal Extent
1999-10-27 to 2009-11-22
Data Partner
Physical Oceanography Distributed Active Archive Center, Jet Propulsion Laboratory, NASA (NASA/JPL/PODAAC) ,
QUIKSCAT, JET PROPULSION LABORATORY, NASA (NASA/JPL/QUIKSCAT)
Concept ID
C2036882492-POCLOUD
Data State
COMPLETE
Number of Files/Granules
51900
Processing Level
2
Published
Updated
Science Keywords
Surface Winds

Citation

Citation is critically important for dataset documentation and discovery. This dataset is openly shared, without restriction, in accordance with the EOSDIS Data Use and Citation Guidance.

Copy Citation

SeaPAC. (2016). QuikSCAT Level 2B Ocean Wind Vectors in 12.5km Slice Composites Version 3.1 [Data set]. NASA Physical Oceanography Distributed Active Archive Center. https://doi.org/10.5067/QSX12-L2B31 Date Accessed: 2026-04-12

Documents

Variables

The table below lists the variables contained within a single granule for this dataset. Variables often contain observed or derived geophysical measurements collected from a variety of sources, including remote sensing instruments on satellite and airborne platforms, field campaigns, in situ measurements, and model outputs. The terms variable, parameter, scientific data set, layer, and band have been used across NASA’s Earth science disciplines; however, variable is the designated nomenclature in NASA’s Common Metadata Repository (CMR). Variable metadata attributes such as Name, Description, Units, Data Type, Fill Value, Valid Range, and Scale Factor allow users to efficiently process and analyze the data. The full range of attributes may not be applicable to all variables. Additional information on variable attributes is typically available in the data, user guide, and/or other product documentation.

For questions on a specific variable, please use the Earthdata Forum.

Name Description Units Data Type Fill Value Valid Range Scale Factor Offset
ambiguity_direction wind direction ambiguity degree float -9999 0 to 360 1 N/A
ambiguity_obj wind objective function values 1 float -9999 -199 0 1 N/A
ambiguity_speed wind speed ambiguity m s-1 float -9999 0 to 100 1 N/A
atmospheric_speed_bias atmospheric speed bias m s-1 float -9999 -100 to 100 1 N/A
cross_track_wind_speed_bias relative wind speed bias with respect to sweet spot m s-1 float -9999 -100 to 100 1 N/A
lat latitude degrees_north float N/A -90 to 90 1 N/A
lon longitude degrees_east float N/A 0 to 360 1 N/A
nudge_wind_direction model wind direction degree float -9999 0 to 360 1 N/A
nudge_wind_speed model wind speed m s-1 float -9999 0 to 100 1 N/A
number_in_aft number of inner aft looks in wind vector cell 1 byte 0 1 to 127 1 N/A
number_in_fore number of inner forward looks in wind vector cell 1 byte 0 1 to 127 1 N/A
number_out_aft number of outer aft looks in wind vector cell 1 byte 0 1 to 127 1 N/A
number_out_fore number of outer forward looks in wind vector cell 1 byte 0 1 to 127 1 N/A
num_ambiguities number of ambiguous wind directions found in point-wise wind retrieval prior to spatial filtering 1 byte 0 1 to 4 1 N/A
rain_impact impact of rain upon wind vector retrieval 1 float -9999 0 to 100 1 N/A
retrieved_wind_direction equivalent neutral wind direction at 10 m degree float -9999 0 to 360 1 N/A
retrieved_wind_speed equivalent neutral wind speed at 10 m m s-1 float -9999 0 to 100 1 N/A
retrieved_wind_speed_uncorrected wind speed without rain correction m s-1 float -9999 0 to 100 1 N/A
time date and time seconds since 1999-1-1 0:0:0 double N/A N/A 1 N/A
wind_obj retrieved wind objective function value 1 float -9999 -199 0 1 N/A
You're viewing 20 of 20