N: 90 S: -90 E: 180 W: -180
Description
Starting from August 6th in 2019, Sentinel-5P TROPOMI along-track high spatial resolution (~5.5km at nadir) has been implemented.
For data after August 6th of 2019, please check S5PL2_NO2_ data collection.
The Copernicus Sentinel-5 Precursor (Sentinel-5P or S5P) satellite mission is one of the European Space Agency's (ESA) new mission family - Sentinels, and it is a joint initiative between the Kingdom of the Netherlands and the ESA. The sole payload on Sentinel-5P is the TROPOspheric Monitoring Instrument (TROPOMI), which is a nadir-viewing 108 degree Field-of-View push-broom grating hyperspectral spectrometer, covering the wavelength of ultraviolet-visible (UV-VIS, 270nm to 495nm), near infrared (NIR, 675nm to 775nm), and shortwave infrared (SWIR, 2305nm-2385nm). Sentinel-5P is the first of the Atmospheric Composition Sentinels and is expected to provide measurements of ozone, NO2, SO2, CH4, CO, formaldehyde, aerosols and cloud at high spatial, temporal and spectral resolutions.
The TROPOMI retrieval of total and tropospheric NO2, is based on the DOMINO approach, a DOAS retrieval, a pre-calculated air-mass factor (AMF) look-up table, and a data assimilation/chemistry transport model for the separation of the stratospheric and tropospheric contributions to the NO2 column. It also include many retrieval developments of the European Quality Assurance for Essential Climate Variables (QA4ECV) project.
Product Summary
Documents
USER'S GUIDE
READ-ME
ALGORITHM THEORETICAL BASIS DOCUMENT (ATBD)
GENERAL DOCUMENTATION
PRODUCT HISTORY
Variables
The table below lists the variables contained within a single granule for this dataset. Variables often contain observed or derived geophysical measurements collected from a variety of sources, including remote sensing instruments on satellite and airborne platforms, field campaigns, in situ measurements, and model outputs. The terms variable, parameter, scientific data set, layer, and band have been used across NASA’s Earth science disciplines; however, variable is the designated nomenclature in NASA’s Common Metadata Repository (CMR). Variable metadata attributes such as Name, Description, Units, Data Type, Fill Value, Valid Range, and Scale Factor allow users to efficiently process and analyze the data. The full range of attributes may not be applicable to all variables. Additional information on variable attributes is typically available in the data, user guide, and/or other product documentation.
For questions on a specific variable, please use the Earthdata Forum.
| Name Sort descending | Description | Units | Data Type | Fill Value | Valid Range | Scale Factor | Offset |
|---|---|---|---|---|---|---|---|
| PRODUCT/SUPPORT_DATA/INPUT_DATA/surface_altitude_precision | surface altitude precision from S5P_L2__NO2____1 | m | N/A | N/A | N/A | N/A | N/A |
| PRODUCT/SUPPORT_DATA/INPUT_DATA/surface_classification | Land-water mask and surface classification based on a static database from S5P_L2__NO2____1 | N/A | N/A | N/A | N/A | N/A | N/A |
| PRODUCT/SUPPORT_DATA/INPUT_DATA/surface_pressure | Surface pressure from S5P_L2__NO2____1 | Pa | N/A | N/A | N/A | N/A | N/A |
| PRODUCT/time | reference time for the measurements from S5P_L2__NO2____1 | seconds since 2010-01-01 00:00:00 | N/A | N/A | N/A | N/A | N/A |
| PRODUCT/time_utc | Time of observation as ISO 8601 date-time string from S5P_L2__NO2____1 | N/A | N/A | N/A | N/A | N/A | N/A |
| PRODUCT/tm5_constant_a | TM5 hybrid A coefficient at upper and lower interface levels from S5P_L2__NO2____1 | Pa | N/A | N/A | N/A | N/A | N/A |
| PRODUCT/tm5_constant_b | TM5 hybrid B coefficient at upper and lower interface levels from S5P_L2__NO2____1 | 1 | N/A | N/A | N/A | N/A | N/A |
| PRODUCT/tm5_tropopause_layer_index | TM5 layer index of the highest layer in the tropopause from S5P_L2__NO2____1 | 1 | N/A | N/A | N/A | N/A | N/A |
| PRODUCT/vertices | TM5 atmospheric layer upper and lower bound indices from S5P_L2__NO2____1 | 1 | N/A | N/A | N/A | N/A | N/A |