N: 90 S: -90 E: 180 W: -180
Description
This level 2 support product is generated by the SiFSAP (Single Field-of-View Sounder Atmospheric Products) algorithm. The SIFSAP algorithm provides retrieval for each sounder Field of View (FOV), therefore, it has 3-times higher horizontal spatial resolution and 9-time denser products compared to other current IR sounder products. Since SiFSAP is an FOV-based algorithm, its product variables have an additional dimension which represents the number of FOVs. For CrIS instrument, there are 9 FOVs for each Field of Regard (FOR). The SiFSAP Level-2 retrieval products contain a variety of geophysical parameters retrieved from IR/MW sounder suites measurements, including profiles of temperature, water vapor and trace gas species as well as clouds and surface properties. This support product provides height vertical sampling (up to 98 levels) and also includes more detailed Empirical Orthogonal Function (EOF) information like averaging kernels. A level 2 granule has been set as 6 minutes of data. There are 240 granules per day, with an orbit repeat cycle of approximately 16 day.
Product Summary
Citation
Citation is critically important for dataset documentation and discovery. This dataset is openly shared, without restriction, in accordance with the EOSDIS Data Use and Citation Guidance.
Copy Citation
Documents
READ-ME
ALGORITHM THEORETICAL BASIS DOCUMENT (ATBD)
SCIENCE DATA PRODUCT VALIDATION
Variables
The table below lists the variables contained within a single granule for this dataset. Variables often contain observed or derived geophysical measurements collected from a variety of sources, including remote sensing instruments on satellite and airborne platforms, field campaigns, in situ measurements, and model outputs. The terms variable, parameter, scientific data set, layer, and band have been used across NASA’s Earth science disciplines; however, variable is the designated nomenclature in NASA’s Common Metadata Repository (CMR). Variable metadata attributes such as Name, Description, Units, Data Type, Fill Value, Valid Range, and Scale Factor allow users to efficiently process and analyze the data. The full range of attributes may not be applicable to all variables. Additional information on variable attributes is typically available in the data, user guide, and/or other product documentation.
For questions on a specific variable, please use the Earthdata Forum.
| Name Sort descending | Description | Units | Data Type | Fill Value | Valid Range | Scale Factor | Offset |
|---|---|---|---|---|---|---|---|
| h2o_vap_tot_qc | h2o_vap_tot QC flag | N/A | int8 | -127 | N/A | N/A | N/A |
| ir_cld_phase | Cloud Ice/Water flag from infrared. Clear = 0; liquid water clouds = 1; ice clouds = 2 | N/A | int16 | -32767 | N/A | N/A | N/A |
| land_frac | land fraction over the FOV | 1 | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |
| lat | latitude of FOV center | degrees_north | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |
| lat_bnds | latitudes of points forming a polygon around the perimeter of the FOV | degrees_north | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |
| lat_geoid | latitude of FOV center on the geoid (without terrain correction) | degrees_north | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |
| local_solar_time | local apparent solar time in hours from midnight | hours | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |
| lon | longitude of FOV center | degrees_east | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |
| lon_bnds | longitudes of points forming a polygon around the perimeter of the FOV | degrees_east | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |
| lon_geoid | longitude of FOV center on the geoid (without terrain correction) | degrees_east | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |
| mean_anom_wrt_equat | spacecraft mean anomaly measured with respect to the ascending node | degree | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |
| mw/mw_air_temp | air temperature profile from the MW-Only step | kelvin | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |
| mw/mw_air_temp_dof | The trace of the averaging kernel matrix as a measure of the amount of information about the air temperature profile extracted from the measured microwave radiation in the MW-only retrieval step. | 1 | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |
| mw/mw_air_temp_err | mw_air_temp error estimate | kelvin | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |
| mw/mw_air_temp_qc | mw_air_temp QC flag | N/A | int8 | -127 | N/A | N/A | N/A |
| mw/mw_bndry_lay_status | MW bndry_lay calculation status flag: 0: sea success; 1: sea with pressure grid selected at the end of the allowed values (4000 m or next to bad input data); 4: sea with lowest allowed altitude, 250 m above the surface ; 8: sea with not enough good data; 16: land success; 17: land with pressure grid selected at the end of the allowed values (6000 m or next to bad input data); 20: land with lowest allowed altitude: 250 m above the surface; 24 land with not enough good data. | N/A | int8 | -127 | N/A | N/A | N/A |
| mw/mw_bndry_lay_thick | Geodetic thickness of the planetary boundary layer from the MW-Only retrieval. This is determined from the maximum smoothed lapse rate of relative humidity over the range of 250-4000 meters over ocean, 250-6000 meters over land. The value is less reliable over land surfaces than ocean. | m | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |
| mw/mw_bndry_lay_thick_qc | mw_bndry_lay_thick QC flag | N/A | int8 | -127 | N/A | N/A | N/A |
| mw/mw_bndry_lay_top | Pressure corresponding to mw_bndr_lay_thick | Pa | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |
| mw/mw_bndry_lay_top_qc | mw_bndry_lay_top QC flag | N/A | int8 | -127 | N/A | N/A | N/A |
| mw/mw_bndry_lay_top_rel_hum_lapse_rate | The slope of the smoothed relative humidity with respect to altitude at the top of the planetary boundary layer from the MW-Only retrieval. | 1/m | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |
| mw/mw_bndry_lay_top_rel_hum_lapse_rate_qc | mw_bndry_lay_top_rel_hum_lapse_rate QC flag | N/A | int8 | -127 | N/A | N/A | N/A |
| mw/mw_h2o_liq_dof | The trace of the averaging kernel matrix as a measure of the amount of information about cloud liquid water extracted from the measured microwave radiation in the MW-only retrieval step. | 1 | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |
| mw/mw_h2o_liq_tot | MW-Only total cloud liquid water | kg / m2 | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |
| mw/mw_h2o_liq_tot_err | mw_h2o_liq_tot error estimate | kg / m2 | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |
| mw/mw_h2o_liq_tot_qc | mw_h2o_liq_tot QC flag | N/A | int8 | -127 | N/A | N/A | N/A |
| mw/mw_h2o_vap_dof | The trace of the averaging kernel matrix as a measure of the amount of information about the water vapor profile extracted from the measured microwave radiation in the MW-only retrieval step. | 1 | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |
| mw/mw_h2o_vap_tot | total precipitable water vapor from the MW-only retrieval step | kg / m2 | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |
| mw/mw_h2o_vap_tot_err | mw_h2o_vap_tot error estimate | kg / m2 | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |
| mw/mw_h2o_vap_tot_qc | mw_h2o_vap_tot QC flag | N/A | int8 | -127 | N/A | N/A | N/A |
| mw/mw_rel_hum | relative humidity over equilibrium phase from the MW-Only step | 1 | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |
| mw/mw_rel_hum_err | mw_rel_hum error estimate | 1 | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |
| mw/mw_rel_hum_qc | mw_rel_hum QC flag | N/A | int8 | -127 | N/A | N/A | N/A |
| mw/mw_spec_hum | mass fraction of water vapor in moist air from the MW-Only retrieval step | kg / kg | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |
| mw/mw_spec_hum_err | mw_spec_hum error estimate | kg / kg | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |
| mw/mw_spec_hum_qc | mw_spec_hum QC flag | N/A | int8 | -127 | N/A | N/A | N/A |
| mw/mw_surf_air_temp | near-surface air temperature from the MW-Only step (~2 meters above surface) | kelvin | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |
| mw/mw_surf_air_temp_err | mw_surf_air_temp error estimate | kelvin | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |
| mw/mw_surf_air_temp_qc | mw_surf_air_temp QC flag | N/A | int8 | -127 | N/A | N/A | N/A |
| mw/mw_surf_mw_emis | Microwave surface emissivity from the MW-only retrieval step | 1 | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |
| mw/mw_surf_mw_emis_dof | The trace of the averaging kernel matrix as a measure of the amount of information about the surface MW emissivity extracted from the measured microwave radiation in the MW-only retrieval step. | 1 | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |
| mw/mw_surf_mw_emis_err | mw_surf_mw_emis error estimate | 1 | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |
| mw/mw_surf_mw_emis_qc | mw_surf_mw_emis QC flag | N/A | int8 | -127 | N/A | N/A | N/A |
| mw/mw_surf_rel_hum | relative humidity near the surface over equilibrium phase from the MW-Only step | 1 | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |
| mw/mw_surf_rel_hum_err | mw_surf_rel_hum error estimate | 1 | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |
| mw/mw_surf_rel_hum_qc | mw_surf_rel_hum QC flag | N/A | int8 | -127 | N/A | N/A | N/A |
| mw/mw_surf_spec_hum | Near-surface mass fraction of water vapor in moist air from the MW-Only retrieval step | kg / kg | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |
| mw/mw_surf_spec_hum_err | mw_surf_spec_hum error estimate | kg / kg | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |
| mw/mw_surf_spec_hum_qc | mw_surf_spec_hum QC flag | N/A | int8 | -127 | N/A | N/A | N/A |
| mw/mw_surf_temp | radiative temperature of the surface from the MW-Only retrieval | kelvin | float32 | 9.9692099683869E+36 | N/A | N/A | N/A |