We are in the process of migrating all NASA Earth science data sites into Earthdata from now until end of 2026. Not all NASA Earth science data and resources will appear here until then. Thank you for your patience as we make this transition.Read about the Web Unification Project
Description
The MCD15A2H Version 6.1 Moderate Resolution Imaging Spectroradiometer (MODIS) Level 4 combined Leaf Area Index (LAI) and Fraction of Photosynthetically Active Radiation (FPAR) product is an 8-day composite dataset with 500 meter pixel size. The algorithm chooses the best pixel available from all the acquisitions of both MODIS sensors located on NASA’s Terra and Aqua satellites from within the 8-day period.
LAI is defined as the one-sided green leaf area per unit ground area in broadleaf canopies and as one-half the total needle surface area per unit ground area in coniferous canopies. FPAR is defined as the fraction of incident photosynthetically active radiation (400-700 nm) absorbed by the green elements of a vegetation canopy.
The following changes and improvements were implemented for inputs to MODIS Version 6.1 LAI/FPAR data products: (1) Version 6.1 Level-1B (L1B) products have been improved by undergoing various calibration changes that include: changes to the response-versus-scan angle (RVS) approach that affects reflectance bands for Aqua and Terra MODIS, corrections to adjust for the optical crosstalk in Terra MODIS infrared (IR) bands, and corrections to the Terra MODIS forward look-up table (LUT) update for the period 2012 – 2017, and (2) A polarization correction has been applied to the L1B Reflective Solar Bands (RSB).
Land Processes Distributed Active Archive Center (LP DAAC)
,
MODIS Adaptive Processing System, Terrestrial Information Systems Laboratory, Earth Sciences Division, Science and Exploration Directorate, Goddard Space Flight Center, NASA (NASA/GSFC/SED/ESD/TISL/MODAPS)
Fraction Of Absorbed Photosynthetically Active Radiation (fapar)
Citation
Citation is critically important for dataset documentation and discovery. This dataset is openly shared, without restriction, in accordance with the EOSDIS Data Use and Citation Guidance.
Copy Citation
Citation Copied
Myneni, R., Knyazikhin, Y., & Park, T. (2021). MODIS/Terra+Aqua Leaf Area Index/FPAR 8-Day L4 Global 500m SIN Grid V061 [Data set]. NASA Land Processes Distributed Active Archive Center. https://doi.org/10.5067/MODIS/MCD15A2H.061 Date Accessed: 2026-05-24
Myneni, Ranga, Yuri Knyazikhin, and Taejin Park. “MODIS/Terra+Aqua Leaf Area Index/FPAR 8-Day L4 Global 500m SIN Grid V061.” NASA Land Processes Distributed Active Archive Center, 2021. doi:10.5067/MODIS/MCD15A2H.061. Date Accessed: 2026-05-24
Myneni, Ranga, et al. MODIS/Terra+Aqua Leaf Area Index/FPAR 8-Day L4 Global 500m SIN Grid V061. NASA Land Processes Distributed Active Archive Center, 2021, doi:10.5067/MODIS/MCD15A2H.061. Date Accessed: 2026-05-24
File Naming Convention
MCD15A2H.A2025209.h23v11.061.2025218033337.hdf
The file name begins with the Product Short Name (MCD15A2H) followed by the Julian Date of Acquisition formatted as AYYYYDDD (A2025209), the Tile Identifier which is horizontal tile and vertical tile provided as hXXvYY (h23v11), the Version of the data collection (061), the Julian Date and Time of Production designated as YYYYDDDHHMMSS (2025218033337), and the Data Format (hdf).
The table below lists the variables contained within a single granule for this
dataset. Variables often contain observed or derived geophysical measurements
collected from a variety of sources, including remote sensing instruments on
satellite and airborne platforms, field campaigns, in situ measurements, and
model outputs. The terms variable, parameter, scientific data set, layer, and band
have been used across NASA’s Earth science disciplines; however, variable is the
designated nomenclature in NASA’s Common Metadata Repository (CMR).
Variable metadata attributes such as Name, Description, Units, Data Type, Fill
Value, Valid Range, and Scale Factor allow users to efficiently process and analyze
the data. The full range of attributes may not be applicable to all variables.
Additional information on variable attributes is typically available in the data,
user guide, and/or other product documentation.
For questions on a specific variable, please use the Earthdata Forum.